Відео

What size is that box?

I really would like to get the cnc cad files. I’m in the gathering stage for a build. Super cool! Hope you have good luck on the thoes slabs there expensive

👍🏻

EPIC BEARD MAN

I notice that the VFD was not listed in the parts list, was that included in the spindle kit?

where is the link of configuration file on mach3?

Absolutely amazing tutorial thank you so so much. Will follow all your videos now. Thanks

Why does the set up need 2 power supplies, could your big one not run the motors and the board or am I missing something?

I was able to get the rotary working on my Falcon 2 pro, but I had to do some messing about with magnets to trick the safety so I could remove the drawer bottom. I also had to add some extension legs (borrowed from another machine) to raise it up a bit. Best I can tell, the rotary is actually designed for the older non-pro version that doesn't have the enclosure and safety features.

00:06 Introduction 02:27 Unboxing & Assembly 10:05 Assembly Overview 12:26 Features Overview 15:57 Software Configuration & Manuals 16:23 Overhead Camera Calibration 19:56 Power vs Speed Test 1 (Wood) 23:04 Power vs Speed Test 2 (Wood) 25:12 Photograph Engraving Test (Wood) 25:40 A4 Photograph Engraving (Wood) 26:46 Cutting Test - Gear Mechanism (Wood) 27:39 Cutting Depth Test (7mm, 12mm, 18mm) 30:26 Fire Safety System Test 32:40 Cutting Depth Test (Continued) 35:43 Power vs Speed Test (Slate) 38:12 Dynamic Range Test (Slate) 41:20 Photograph Engraving (Slate) 41:50 Rotary Tool Unboxing and Overview 43:31 Conclusion

Thank you. Finally someone who actually got to the point and explained the process. Exactly what I needed. Please keep up the great work

the better software for stl change is 123 d or tinkercad

thanks from iran

great video ;-)

Thank you! Almost time to make an update as the program looks a little different now.

How to add a dowel hole symbol??

thanks - that was just what I needed.

How did you design the axels for these gears???

Just a note to thank you for continuing to instruct absolute beginners like myself in FreeCAD. I needed not only a cad program but also a program that could keep everything off the internet and out of the cloud. I have thoroughly enjoyed learning from you. All the best - Phil

how do i get acess to the machine cad file? im looking into building my own and i really like this design.

My Prusa printer continues to crash on every print and it’s always because of a piece of filament on the top layer that builds up so the nozzle jumps over it. Can you do a video on that or maybe tell me how to fix that issue? Thanks Jim

Ive been trying to print a TPU tire for full size Chopper droid. A dozen attempts with no success. Keep getting clogs. K1Max extruder doesnt seem to handle it very well.

i hope i'm not late to learn this, but i love how you explain it. thank you

Looks great! 👍

I bet a lot of people come to this video wanting to know about clearance and tolerance and haw to make gears fit like planetary gears with decent sizing, cos mine don't fit at all! i can't figure out the printre and slicer settings! cheers!

And the tyre doesn't spin freely on the rim?

Hey there! Would you still recommend this PC build today? Greetings

Nicely done. I appreciate seeing the whole process, as you’ve shown. For people getting started, often it is the little things, like getting the proper collet into the collet nut, that are important to learn. I’m pretty new at this myself, but I’ve started to use the work surface as Z0, so that if you remove material from the top, you can still find proper Z after changing tools, etc. I would love to see a detailed walkthrough of a double-sided job, and how you can ensure you are getting X, Z, and Z set properly for the second operation.

I was wandering should the horn of (steering) servo lean toward the back of vehicle, so it would match the lean on bell crank arm/horn? In other words the bell cranks horn is not in 90 degree angle and there fore neighter should the servo horn be in 90 degree angle. This is just a thougth. I am wondering the stearing geometry of my RC car Rustler and I was baffled why the servo horn is not at 90 degree angle to the stearing linkage. It seems to adapt the deviation on bell crank arm/horn. Edit/PS: Try to get hands on picture of chassis assemply of Traxxas Rustler 4x4 and front assemply. I think that is the best way to try visualise what I am talking about.

probably not going to matter for your use case, but i see that the seam affects deformation quite a lot, i would guess that staggering the seam in a spiral (like the carboard tube of paper rolls) would spread that uneven derformation.

Tires turn out way softer without top and bottom layers.

Nice work dude well done

White Double roof with airflow = free coolness

Nice print, how long did it take?

That she'd must feel better😂

This simple solution makes a world of difference and only has to be on for a few minutes every now and then. I have now put this on a timer. I am also going to collect the water when I install guttering. In theory you could take this off grid with a closed loop system.

I will be doing my first primer and paint for a logo I made. There’s 3 different colors and I thought I would have to tape off (and there’s going to have to be lots of pieces which is going to take so long) parts but I see you used multiple colors and we’re still precise with the colors and didn’t mask off anything with tape. So about that, are these brushes precise enough, could I get away like you did without tape easily?

I sure hope you can help me. I'm making some mods to the Prusa firmware. For part of it I want to send text out through the TX pin on the J19 connector (and also make use of the RX pin eventually). In the Prusa firmware there's one object called MarlinSerial (or MSerial) but that appears to communicate via the USB port on the Prusa. I've found info (from ChatGPT) about using the TX/RX pins on the J19 connector but, frankly, it's all quite confusing and appears to require a lot of mods to many .h and .cpp files of the firmware. It refers, for example, to things like SERIAL_PORT_2 in the firmware, but it's not actually there. Do you have, or can refer me to anyone with, knowledge of how to do this, what I need to add or modify so that I can make use of the TX/RX pins on the J19 and have some object in the firmware to control it?

Congrats, you'll love it! It's a really good machine.

You must be crazy! 😲 That's au hold lot of plastic, and a hole lot of time.

Hmm 🤔 hard to say, stabilization of something? Or finding resonance frequencies on the cnc? Or a motion device where you move the accelerometer with your hand and the stepper moves proportional to that.

Thank you! You helped me learn how to export directly to Prusa Slicer.

At 603k views, I do not think YOU have need for a thank you from me as much as I have a need to say "thank you" to you. I have spent the past couple hours getting thru your 22 minute vid, repeating each step, playing with the controls as we went. This is how I learn best, by doing. I have tried to learn CAD packages in the past, always failing. While I still clearly have a very long way to go, I think I am "over the hump" now. While I may well be a slow learner, I found playing the vid at 75% speed made it much more digestible. Thank you again.😄

Hey man I had applied on your website for a lesson, I could use your help figuring out this RC I'm building

I am glad that I watched your video

Fantastic video. Solved my problem with an STL I downloaded that wouldn’t print properly.

Hi You have a very good introduction to MACH3 ,were can I get the two files to complete the setup with the usb connection ????

Perfect tutorial, thanks!!

👍🏻👏🏻